Vacuum laminating machine operation precautions

发布时间：2018-05-28        分享到：

The vacuum laminating machine process is a process to protect and decorate the surface of the printed matter. The laminating film occupies a large share in the post-press processing. When you walk into a bookstore, you will find that most books use this method. This is because the surface of the printed matter that is covered by the film will be smoother, brighter, stain-resistant, water-resistant, and hard-wearing. The colors on the cover of books and magazines will be more vivid and not easily damaged.
The abrasion resistance, folding resistance, tensile strength and moisture resistance of printed materials have been greatly enhanced, the appearance effects of various types of printed products have been protected, and the service life has been improved. What is worth mentioning is that the laminating machine's lamination process can largely compensate for the quality defects of the printed products. Many apparent defects appear in the printing process after the lamination process (especially after the sublaminating). Can be covered.
Before the operation of the vacuum laminating machine, the vacuum laminating machine has gained immeasurable development prospects in related fields, but even the best machines need regular maintenance, so that the service life of the vacuum laminating machine will be longer and the company will make more mistakes. Contributions.
For personal safety and product safety, everyone should use the correct method and procedure when using any product to avoid unnecessary accidents. Here to talk about the correct operation of the vacuum laminating machine points.
First of all, make sure that there is no damage to the rotating parts of the ramming apparatus. Clean the work bench with no dust, and prepare enough necessary items, such as the product plate. To adjust the temperature of the membrane from time to time, make sure that the press rack is locked when the heating hood is turned on. There must be no objects on or around the guide rails, and the personnel's hands must be left. When the laminator is working, it is forbidden to stand around the person. If it is found that the machine abnormally sounds, the power should be turned off immediately, and the protection items of the safety cover type cannot be disassembled. After the end of the work, the power supply must be turned off.